Waterproofing membrane single sided aluminum foil self-adhesive butyl tape

Product Description Butyl tape uses butyl rubber and poly isobutylene as main raw materials and reconciles, squeezes into strip, covered with
isolation paper. And coil it into roll shape. Through these steps, butyl tape is finished. Butyl sealant tape contains two types, one is single sided butyl tape, the OTHER is double sided butyl tape. It has excellent adhesion to all kinds of material surfaces (color steel plate, steel, waterproof coiled material, cement, wood, PC, PE, PVC, EPDM, CPE materials). Thus it is also referred to as self adhesive type sealing tape. Features1. Excellent mechanical properties: high bond strength and high tensile strength, good elasticity, good elongation performance, strong adaptability to base condition changes and cracking, and excellent tracing ability to the shape changes of the substance. 2. Stable chemical properties: excellent chemical resistance, weather fastness and corrosion resistance. 3. Reliable application performance: excellent adhesion, water resistance, sealing, high and low temperature resistance, high stability in sizes. 4. The material is environment-friendly, non-toxic and tasteless, and the construction operation is simple and easy. Application1. Waterproofing of the newly built building, underground, waterproofing treatment of structural joints, and sealing of polymer waterproofing rolls. 2. Sealing and waterproofing treatment of subway tunnel structure construction jointsin municipal engineering. 3. Airtight, waterproof and shock absorption treatment for the joints of color steel plate and sunshine house engineering. 4. Bonding and sealing treatment for steel structure construction. 5. The most widely used aluminum foil tape is suitable for all kinds of waterproofing and sealing treatment under the sun, such as civil roofing, color steel, steel structure, waterproofing rolling material, PC board,etc. 6. Sealing in automobile assembly. 7. Double-sided butyl tape with size of 0.5mm thick and 4mm wide can be used for the first sealing of hollow wall curtain glass. Construction stepsStep 1: Clean up Before the construction, the surface of the base must be cleaned or wiped clean, and keep dry without water, floating soil or oil. Step 2: Cut off Cut or choose proper size of butyl sealing tape according to actual working condition. Step 3: Tear off Tear off the release film on the back of butyl tape and paste it on the gap. Step 4: Paste on After the adhesive tape is pasted, press the tape with hands or rillers to make the tape fully bond with the base surface. Precautions for construction1. Working temperature range should be 45℃ to 15℃. (beyond this scope, the corresponding security measures should be taken) 2. The base surface must be cleaned and kept dry, free of water, dirt or oil. 3. According to the actual project needs to choose different types and sizes of butyl tape. 4. The butyl tape after construction shall not be torn or stripped within 24 hours. 5. Do not use with the waterproofing material contain the organic substances like benzene, toluene, methanol, ethylene, silicone, etc. Product packaging Company Profile Contact Us

Contact us if you need more details on Waterproofing membrane butyl tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Waterproofing membrane、butyl tape. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Building Waterstop Series > SBS/Butyl Waterproof Sheet