Pillar Protection Donut Floating Foam Fender

1.5M x 1.6M Pile Protection EVA Foam Filled Floating and Rotation Donut Fender/Float

 

 

 

Brief Introduction on Floating Dunut Fender:

 

Qingdao Luhang Marine Airbag and Fender Company designs and manufacturesDonut Monopile floating fender exclusively. Luhang Donut Monopile floating fender design is an innovative Foam Filled Fender. This unique fendering system provides a floating energy absorbing foam filled fender.  It is designed to simply slip over a stationary monopile and float at the fluctuating water line.  

Upon contact of a ship or vessel, this design allows the fender to freely rotate and self adjust with the changing water level. The unique rotating feature also makes it ideal for turning dolphins and eliminates shear forces. Where there are large or extreme tidal fluctuations a mooring crown can be constructed into the fender to allow safe moorage during the tidal swings. This can also be accomplished when the fender is compressed.

Donut Monopile floating fender construction consists of:

·A tough, thick filament nylon tire cord reinforced non-marking urethane skin.

·100% closed cell heat laminated energy absorbing foam core

·Heavy duty internal structural steel core

·Anti-friction bearing pads

·Custom designs and shapes

Donut Monopile floating fender has many applications:

·Breasting Dolphins

·Bridge protection

·Corner protection

·Dock fendering where large tidal changes occur

·Dock fendering where vessels need roll along fenders for loading

·Ferry vessel applications

·Lock entrance  

·Turning dolphin applications

Luhang Donut Monopile floating fender performance features:

·High Energy Absorption with low Reaction Force

·Rotates freely thus eliminating shear forces

·Freely floats with water levels, maintaining optimal fendering

·Allows vessel to roll along fender

·Hull conforming flexible design

·Burst resistant construction

·Unsinkable - buoyant

·Easy installation

·Low maintenance

 

Floating Donut Fender Sizes and Specs:

 

Floating Donut Fender Installation:

Installation of our Donut Fenders is  very easy. The fenders will be delivered to site ready for installation on the fender piles. Once lifted over and lowered onto the fender pile the fender should be ready for use.

Ballasting or trimming is not required as the fender will float at the designed level. Finally a capping feature can be placed over the top of the fender pile to finish the installation off. Maintenance of our donut fenders is very low as the internal bearings are designed to allow the fender to rotate and float up and down with the tide for a period of 25 years.

Any additional equipment installed with the donut fender such as secondary fenders or mooring points should be maintained separately.

 

 

Pneumatic Ship Fenders:

EVA Fender

 Our Oversea Projects:

Certifications:

Company Information:

Qingdao LuHang Marine Airbag and Fender Co., LTD, located in Qingdao, Shandong province, is the largest marine airbag and  fender manufacturer in China. In the field of Marine Fender and airbag, LuHang deserves to be the only one professional manufacturer in China. Since 1988, LuHang has developed in the area of marine and airbag for more than 20 years. Differing from the newly emerging companies in this related industry, LuHang has the most mature technical experience and the most advanced equipments, which is incomparable. LuHang has the largest vulcanizing pot in Asia. In addition, Japanese self-defense forces also employ LuHang Marine Rubber Fender for years. Products from LuHang are used all over the world. Quality is always the key to our 27 years’ survival throughout our production history. LuHang dares to declare that we are the best choice for you!

FAQ:

Q: How can we choose the suitable Marine Airbags or ship fenders?

A: For airbags, customers need provide 3 main information: Diamerter, Effective Length, and the maximum working pressure:

Diameter: we have 0.8m, 1.0m, 1.2m, 1.5m, 1.8m, 2.0m for choice

Length: the length should be 3 times of diameter and the maximum length is 24m.

Working pressure: it depends on the real working situations. 

  For ship fneders,customers need provide following information:

Diameter and Length;

Initial pressure: we have 50KPa and 80KPa for choice

Type of fender: by fender cover, we have tyre chain cover, cord cover and net cover for choice;

 

Contact us if you need more details on Donut Fender. We are ready to answer your questions on packaging, logistics, certification or any OTHER aspects about Floating Donut Fender、Pillar Fender. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Foam Filled Fender